| 000 | 02374nam a22002297a 4500 | ||
|---|---|---|---|
| 003 | OSt | ||
| 005 | 20250331162745.0 | ||
| 008 | 250331b |||||||| |||| 00| 0 eng d | ||
| 040 | _cNVSU | ||
| 100 | _aAmbatali, Kenneth A. | ||
| 245 |
_aDesign and performance evaluation of an automated laboratory-scale flatbed rice dryer/ _cKenneth A. Ambatali, Sherwin B. Beleno, Rannyl Ross A. Coyao, Nasser Joshua B. Flores and Jairus Von J. Panganiban |
||
| 260 |
_aBayombong: _bNueva Vizcaya State University, _c2024. |
||
| 300 |
_axix, 54 leaves : _billustrations (some colored), photos ; _c28 cm. |
||
| 500 | _a The study was conducted to design, fabricate, and evaluate the performance of the automated laboratory-scale flatbed rice dryer in terms of mean drying capacity, moisture reduction per hour, drying efficiency, dried seeds' viability, or ability to germinate. Aside from the performance evaluation, a simple cost analysis was also conducted. The main structure of the automated laboratory-scale flatbed dryer has a length of 1,000 mm, width of 500 mm, and a height of 700 mm. It has five (5) basic components: drying bin, 1.1 kW electric heater, 10" centrifugal type blower, 1.5 hp electric motor, and an automatic power shut-off system. At an average drying temperature of 44.28°C±0.56°C of the flatbed dryer, the results showed that the mean drying capacity of the automated laboratory-scale flatbed dryer was about 19 kg/h, the mean moisture reduction per hour was about 4.03 kg/h, the mean drying efficiency of approximately 66%, and mean germination rate of the dried grains of approximately 89%, which was above the acceptable Philippine National Standard of at least 85%. The average power consumption of the flatbed dryer is about 2.2 kWh. Furthermore, the simple cost analysis showed that the dryer has a breakeven of about 10, 145 kg of dried rice grains annually, a return on investment of approximately 75% and an estimated payback period of about 16 operating months. | ||
| 500 | _aThesis (Bachelor of Science in Agricultural and Biosystems Engineering - AB Process Engineering) | ||
| 504 | _aIncludes bibliographical references and appendices | ||
| 700 | _aBeleno, Sherwin B., author. | ||
| 700 | _aCoyao, Rannyl Ross A., author. | ||
| 700 | _aFlores, Nasser Joshua B., author. | ||
| 700 | _aPanganiban, Jairus Von J., author. | ||
| 942 |
_2ddc _cU _n0 |
||
| 999 |
_c675 _d675 |
||